rain/showcase

A concept site by Rain Software. Sidelight Surfboards isn't a real business.

SidelightSurfboards · Brookvale

Bay open Tue to Fri 2 to 5, Sat 8 to 12

(02) 5550 8115

Mid-lengths, fish and logs, shaped by hand in Brookvale.

I've been shaping boards on the Northern Beaches since 1985. You come into the bay, tell me where you surf and what you ride now, and I shape one for you. Tess glasses it in the room next door. About eight weeks, from $1,090.

Col

Order this week and it's ready in about eight weeks.

Bay open Tue to Fri 2 to 5, Sat 8 to 12.

A half-shaped foam surfboard on padded stands in a dim shaping bay, the shaper behind it and a rack of round lamps along the wall
On the stands, Chard Road

One board, start to finish

This is #2431, a 7'2" Pelican for Mel from Collaroy. It took seven and a half weeks from the chat to the water. Here's where the time and the money went.

Tuesday 1 September, 3:20pm

The chat

Mel rides a 9'2" log at Collaroy and wanted a 6'6" for the days it gets too steep for it. She's 64 kilos and surfs three mornings a week. I reckoned a 6'6" would be a step too far and drew her a 7'2" Pelican instead: nearly the same paddle as her log, but it'll turn. Twenty minutes, a sketch on the back of an order form, and a $250 deposit.

Thursday 10 September, 6:40am

Pencil line

The blank is a 7'6" polyurethane blank from up the road, with a basswood stringer down the middle and some rocker already in it. I lay the Pelican template along the stringer, trace one side in pencil, flip the template and trace the other. Then it's a handsaw, cutting just outside the line.

8:15am

Down to 27⁄8

The planer takes it from 35⁄8" thick down to 27⁄8", in long passes from nose to tail. I check the thickness every few passes and the rocker against a straight edge. This is where the volume gets decided: 48.5 litres for Mel.

The shaper holding a steel ruler and pencil across the deck of a foam blank, a respirator hanging round his neck
Checking width every few passes

10:30am

Rails, under the side lights

The lights in a shaping bay sit low along the walls, never on the ceiling. Light from the side throws a shadow off every lump, so you can see a bump before you can feel it. That's where the name comes from. I turn the rails with a surform and a sanding screen, softer in the nose and harder towards the tail. It's the part a machine still can't do for you.

Last thing, I pencil it on the stringer: #2431, 7'2 x 211⁄2 x 27⁄8, MEL.

Dusty, weathered hands pushing a surform along the rail of a foam blank, a pale blue wall behind
Rails by hand

30 September to 14 October

Tess and the glassing room

Tess mixes the Lagoon tint by eye, then lays up the bottom with one layer of 6 oz cloth and the deck with two, a 6 and a 4. Fin boxes go in, a hot coat goes over the top, and every step waits a day to cure. Sanding takes an afternoon. The gloss and polish takes another two days.

This is the slow part. Most of the eight weeks is boards waiting their turn on the rack.

Saturday 24 October, 9:10am

Back to Collaroy

Mel picked it up on the Saturday and paid the balance. She had it at Long Reef the next morning, two to three foot with a light westerly.

Invoice for board #2431
Pelican 7'2"$1,290
Lagoon tint, deck and bottom$180
Gloss and polish$140
2+1 fin set$165
Total, including GST$1,775
Deposit paid 1 September−$250
Paid on pick-up$1,525
A wave peeling along a reef at sunrise, a few surfers sitting out the back and a rock platform in the foreground
Long Reef, Sunday 25 October, 6:50am

Four templates on the wall

Every Sidelight board starts from one of these. They're drawn here at the same scale as each other, the way they hang in the bay, so the fish really is a bit over half a log. Pick one for sizes and prices.

Mullet

Twin keel fish, 5'4" to 6'2", from $1,150

For summer. Soft, knee-to-chest-high beachies when you want to go fast down the line and not paddle for everything twice. Glassed-on keels are the proper way to do it (add $160, fins included). Twin FCS II boxes if you want to swap fins.

Mullet sizes
LengthWidthThicknessVolume
5'4"201⁄2"23⁄8"29.0 L
5'6"207⁄8"27⁄16"31.4 L
5'8"211⁄4"21⁄2"34.0 L
5'10"211⁄2"29⁄16"36.5 L
6'0"213⁄4"25⁄8"39.0 L
6'2"22"23⁄4"42.5 L

From $1,150, including GST. FCS II or Futures boxes included.

Order a Mullet

Tailor

Hybrid shortboard, 5'8" to 6'4", from $1,090

The board for the rest of the year. A bit more foam than a pro model, a bit less rocker, and a squash tail that still turns when Long Reef gets some push in it. Five fin boxes so you can run it as a thruster or a quad.

Tailor sizes
LengthWidthThicknessVolume
5'8"191⁄2"27⁄16"28.5 L
5'10"197⁄8"21⁄2"31.0 L
6'0"201⁄4"25⁄8"33.8 L
6'2"205⁄8"23⁄4"37.0 L
6'4"21"213⁄16"40.2 L

From $1,090, including GST. FCS II or Futures boxes included.

Order a Tailor

Pelican

Mid-length egg, 6'8" to 7'10", from $1,290

Our most ordered board. Catches everything, turns more than you'd think, and gets you a wave or two before the crowd at Collaroy notices. 2+1 setup: a longer single fin in a box with two small side bites.

Pelican sizes
LengthWidthThicknessVolume
6'8"21"23⁄4"42.0 L
7'0"211⁄4"213⁄16"45.5 L
7'2"211⁄2"27⁄8"48.5 L
7'6"213⁄4"215⁄16"52.5 L
7'10"22"3"57.0 L

From $1,290, including GST. FCS II or Futures boxes included.

Order a Pelican

Long Tom

Single fin log, 9'0" to 9'8", from $1,650

Heavy on purpose. Volan cloth, a soft 50/50 rail and a concave in the nose so you can walk up and stay there. Best on a slow, peeling Long Reef morning when the crowd's at Manly. The single fin's included.

Long Tom sizes
LengthWidthThicknessVolume
9'0"221⁄4"27⁄8"66.0 L
9'2"221⁄2"27⁄8"68.5 L
9'4"221⁄2"3"71.0 L
9'6"223⁄4"3"74.0 L
9'8"23"31⁄16"77.5 L

From $1,650, including GST. FCS II or Futures boxes included.

Order a Long Tom

Extras

Resin tint, bottom only
$120
Resin tint, deck and bottom
$180
Opaque pigment instead of tint
$150
Gloss and polish, instead of the sanded finish
$140
Glassed-on keels (Mullet)
$160
Volan cloth on any other model
$220
Extra 4 oz layer on the deck (heavier riders, or if you're hard on boards)
$60
Fins: Tailor thruster set
$150
Fins: Mullet twin set
$140
Fins: Pelican 2+1 set
$165
Fins: Long Tom single fin
Included
Freight anywhere in Australia
From $90

What size should I get?

Litres are a starting point, not the answer. Tell me a bit about how you surf and this will give you somewhere to start. We'll still have the chat.

How often do you surf?
What do you ride now?
What's it for?

The size finder needs JavaScript. Ring the bay on (02) 5550 8115 and we'll work it out together.

A surfer in a wetsuit carrying a white board across a wet rock shelf as whitewater washes over it
Off the rock shelf at Long Reef

On the stands this week

Updated this week

Boards in the bay and where each one is at
No.BoardWhere it's at
#24415'10" Mullet, glassed-on keelsShaped, waiting for glassing
#24409'4" Long TomOn the stands today
#24397'6" Pelican, Bluebottle tintHot coat curing
#24386'0" TailorSanding
#24376'8" PelicanGloss and polish
#24365'8" Mullet, Banksia tintReady. Tess has texted.
#24359'2" Long TomPicked up Saturday

Order this week and yours is ready in about eight weeks. We shut from 20 December to 11 January, like most of Brookvale.

Reviews

4.8 ★★★★★ from 71 reviews on Google

  • Mel D. 3 weeks ago

    Col talked me out of the board I came in asking for, and he was right. 7'2 Pelican in the green tint, most fun I've had at Collaroy in years. Tess sent photos along the way which was a nice touch.

  • Rob K. 2 months ago

    Third board from Col. Dropped my 6'2 Mullet in with a crack in the rail on Tuesday, picked it up Friday and I can't find where it was.

  • Anh T. 4 months ago

    Lovely board and really well finished. Took 11 weeks instead of the 8 they quoted, though Tess texted me it was running late before I had to ask.

  • Jo W. 6 months ago

    First board that isn't a foamie. Went in nervous, Col spent 40 minutes with me and drew it out on the template. Bay's a bit hard to find, it's the roller door round the back.

  • Pete S. a year ago

    9'4 Long Tom. Heavy, slow to turn, exactly what I asked for.

Two surfers sitting on their boards far out in a calm sea under a pale morning sky, a headland with a lighthouse behind them
Waiting on a set

Start an order

Fill this in, or just ring the bay on (02) 5550 8115. Nothing's locked in until we've talked.

  1. Send this, or ring.
  2. Come into the bay for a chat, or a phone call if you're out of town. Bring the board you ride now if you can.
  3. $250 deposit once we've settled on the shape.
  4. Tess texts you a photo when it's shaped and again when it's off the glassing rack.
  5. Pick it up and pay the balance. Freight anywhere in Australia from $90.

7'2" Pelican · Clear

Resin tint
Finish
Fins

Aerial view of Long Reef Beach, with Dee Why Lagoon behind the dunes and the golf course out on the headland
Long Reef and Dee Why Lagoon, ten minutes from the bay

The bay

Unit 6, 37 Chard Road, Brookvale NSW 2100 Round the back of the complex, the roller door with the blue stripe. Park on Chard Road; the spaces out the front belong to the panel beaters.

Open in Maps

Tuesday to Friday
2pm to 5pm
Saturday
8am to 12pm
Sunday and Monday
Closed

Mornings we're shaping. If it's pumping, we're surfing and the door opens at 10.

Closed 20 December to 11 January.

(02) 5550 8115

Ding repairs

Drop it in during bay hours. Most are back within five working days.

Small ding, sealed and sanded
From $45
Rail or nose ding
From $80
Broken fin box
$90
Snapped board
Bring it in and we'll be honest about whether it's worth it.
Call the bay Text Order